Standard Duty Wall Panel Carton (Barnwood Grey) (2438mm)
StoreWALL panels are ideal for just about every use around the home, garage and even workshop. Each panel is waterproof, versatile and significantly stronger than most storage or slatwall panels currently available in Australia.
Our slatwall panels are made from toughened PVC and are water and mould resistant. Each Standard Duty Wall Panel carton includes 4 panels. The dimensions of each panel are: 2438.4mm x 304.8mm x 16.7mm. The total coverage for each panel is .74m squared
Your 4 panels will cover 2.96m squared
110kg at the panel surface
50kg at 10cm from the surface of the wall
The Standard Duty Wall Panel colour range includes Weathered Grey, Brite White, Dover White and Barnwood Grey.
Other colours are available as a Special Order. These colours include: Khaki, Global Pine, Rustic Cedar and Graphite Steel. Please email (email@example.com) or call us (0411280646) for more information.
Standard Duty Wall panel has a 2.4m profile and is compatible with a Standard Duty InstallStrip-SD for easy installation. The InstallStrip-SD simplifies installation, provides superior strength, increases versatility and enhances aesthetics. The InstallStrip-SD is designed to work with storeWALL Standard Duty panels only.
We recommend that you utilise our InstallStrips for a more secure installation. Each InstallStrip-SD is 914mm in length and can be separated into 609mm or 304mm sections to provide a truly customisable installation.
Recommendation: Two InstallStrip-SD for EACH 2.4m panel. With 4 panels in each 2.4m carton, you require 8 x InstallStrip-SD for one case. For clarity each 2.4m panel will have an install strip every 400mm. That is a total of 6 points supporting each panel.
Carton Dimensions: 2464mm x 343mm x 76mm
Please note – 2.4m cartons ship via courier not Australia Post.
We have a comparison chart of the 3 panel options here.
Notes: Standard Duty garage slatwall panels offer an excellent waterproof and versatile slatwall storage option, with many of the design features of the original storeWALL. Significantly stronger and more substantial than conventional garage storage slatwall.
Easy Installation InstallStrips are sold separately and use 8g x 40mm screws. Each 1219mm panel uses 1 InstallStrip. Each 2438mm panel uses 2 InstallStrips. Be sure to order the proper InstallStrips: Standard Duty or Heavy Duty. Or you can use storeWALL Colour Matched Screws and fasten each panel from the front. (approximately 20 screws per 1219mm panel).
Our garage Slatwall Panels are available in your choice of 7 designer colours: Weathered Grey, Brite White, Dover White, Khaki, Graphite Steel, Barnwood Grey, Whitewood and Rustic Cedar. Our Graphite Steel finish is a unique metallic surface treatment, very similar to that found on an automobile. The substructure is solid PVC as are all storeWALL slatwall panels. Please note the metallic effect is only on the surface and if gouged deep enough, just like an automobile, the gouge may show. Thus we encourage reasonable care and handling be exercised when choosing our Graphite Steel slatwall panels.Our Weathered Grey finishes are made as solid colour slatwall but do have a painted finish on the surface. This is to eliminate common streaking in the extrusion process that is only found in grey extruded plastic. The painted finish results in a even consistent finish. Our Rustic Cedar, Global Pine and Barnwood grain finishes are intended to simulate real wood; and like real wood there might be some variation in grain and tint from panel to panel.