In a lot of cases the size and design of slatwall panels can be quite similar between providers. This also applies to the slots into which the accessories are installed. Therefore, it is highly likely that our StoreWALL hooks and baskets will fit into your existing slatwall system.
A great way to check is to compare the measurements of your panels to the photos below. The key is to ensure that the Profile of the Panel looks similar with the groove allowing the accessory to fit its 15mm lip. On the second photo, the distance between the top of the groove and the bottom should be about 75mm.
If you send us a photo of what you have, we can assist you as best we can. We have several videos on our StoreWALL channel which shows us using StoreWALL accessories with the StorEase Smart Wall Panel (wider aluminium finish) offered by Bunnings.
Note that StoreWALL accessories fit into StorEase Wall Track Slimline panel (slimmer black panel) but due to the grouve design, have considerable slack and move. We don’t recommend that you use the Slimline panel.
The StorEase accessories do not work with the StoreWALL panels.
We also have an article of our accessories being used on the Garagetek wall panel. Infact many customers have purchased our accessories and used them with Garagetek wall panels.
Similarly, we also have an article of our accessories being used with the Garagesmart wall panel.
StoreWALL accessories have been successfully used on garage wall panels sold by Garage Living.